Titebond TTB-2403 8oz Quick and Thick Multi-Surface Glue

Description

Titebond Quick and Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Titebond Quick and Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.\r\nFeatures\r\n\r\n2x Faster – 3x Thicker Than Traditional PVA Glues\r\nDries Clear – Paintable\r\nIdeal For The Woodshop, Home And Craft Projects\r\nFill Small Cracks And Gaps\r\nUnaffected By Finishes\r\nExcellent Sandability On Wood\r\nDesigned For Interior Projects\r\nWater Cleanup and Non-Toxic\r\nNonflammable — No Offensive Odor\r\nConforms To ASTM D4236\r\n\r\nApplication Guidelines\r\n\r\nApplication temperature: above 50°f\r\nOpen assembly time: 3-5 minutes (70°f./50%RH)\r\nTotal assembly time: 10-15 minutes (70°f./50%RH)\r\nMinimum required spread : approximately 6 mils or 250 square feet per gallon\r\nRequired clamping pressure: enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)\r\nMethod of application: plastic bottles for fine applications; glue may also be spread with a roller, spreader or brush.\r\nCleanup: damp cloth while glue is wet. Scrape off and sand dried excess.\r\n\r\nLimitations\r\n\r\nTitebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. \r\nFor exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. \r\nNot for structural or load bearing applications. \r\nNot recommended for photos, washable wearables, metals, plastics or rubber. \r\nDo not use when temperature, glue or materials are below 50°F. \r\nFreezing may not affect the function of the product but may cause it to thicken. \r\nAgitation should restore product to original form.\r\nFor wood, sand glued area thoroughly before staining. \r\nStore at room temperature.\r\nKEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.\r\n\r\nPhysical Properties\r\n\r\nType: thixotropic polyvinyl acetate\r\nCalculated VOC: 2.4 g/l\r\nState: high-viscosity liquid\r\nWeight per gallon: 9.0 lbs.\r\nColor: white\r\nDried film: clear\r\nFlashpoint: > 200°f\r\nSolids: 60%\r\nFreeze/thaw stability: stable up to 2 cycles\r\nViscosity: 36,500 cps\r\nPh: 4.8\r\nChalk temperature: to assure a good bond, 50°f is the lowest recommended temperature of the glue, air and materials during application.\r\nStorage life: 24 months in tightly closed containers at 75°f